in China, HYCNC can provide various

Product Introduction and Description of Water Cooling CNC Vacuum Pump

product composition:

also requires the customer to groove the groove. After the groove is grooved, flange joints are installed in each area. The most common is 6 areas (which can be partitioned according to customer needs). 6 pcs flange joints are connected to the pipe. Then, connect the 6 pcs valve to the 6-way connector, and connect the wire pipe from the 6-way connector to the vacuum pump.

3 Insufficient water supply

6 The gap of the adsorption pump is damaged

The influencing factors of vacuum pump suction are as follows: