Feature
2 engines
The driving engine is the vanguard engine of 20 horsepowers, the most optimized for controlling pests, transferring, storing, harvesting, arranging twigs, reaping fruits. The ventilation engine has a high capacity in orchards with big trees. 4 wheel (front and rear) driving
4 wheel driving (front and rear), longer out-diameter and wider special wheels allows powerful driving force and safe spraying in any fields, such as curved lands, swamps and slopes. Transmission
Its structure is simple and strong to be shifted into a 6-stage advance and a 2-stage backing according to working conditions, ground and land situation. Comfortable seat
The seat has 2 springs which relieves the vibrations. The front differential gear minimizes the driver`s fatigue with the structure by rolling right and left by the shape of the fields. Convenient and safe power steering
The direction shifting device shows the capacity for changing direction smoothly and stably under any bad conditions and low speed because it uses the same power steering as cars.
The front differential gear is designed to minimize the radius of spinning with a double joint yoke, resulting in a cheerful and safe working environment. Convenient maintenance
The engine and the power transmission parts are designed with switching type covers to prevent any failure and repair easily and check if needed. Instrument panel & operating switch
Various instruments are arranged around a driver's seat for convenient operation, immediate checking of any abnormalities and safe working. On-off nozzle & ceramic distribution opening
The nozzle has a structure to be on-off individually and adjusts the spraying volume of agricultural chemicals. The board of nozzles and the impeller are made of abrasion-proof special ceramic materials to prevent unbalanced spraying by abraded nozzles and wastage of agricultural chemicals.
Exclusive nozzle for pear fields has a large distribution angle and small sprayed particles to maximize the distribution effect. Convenient lifting
A hydraulic lift is installed in a dump device for efficient working of arranging twigs, collecting fruits,transferring, storing and loading. The height of loading is adjustable from the loading case. Convenient open and close of a loading case into 3 directions
The doors of the loading case are very convenient comprising of a 3 directional open and closetype(left, right and back). When both of the side doors are opened or closed together, it becomes a wide floor to be optimized for transferring huge volumes or for storage. Simple and safe connection device
The separation and connection device of the loading case can be easily connected by a pin guidetype. The solid fixing device guarantees secure working. A ventilator and a sprayer are designed to be utilized more conveniently with an electronic clutch.
Specification
Model
|
ASS-555TLDâย
¢
|
|
Dimension
|
Capacity (L)
|
500
|
Overall Length (mm)
|
3,360
|
|
Overall width (mm)
|
1,290
|
|
Overall Height (mm)
|
1,270
|
|
Dry Weight (kg)
|
1,270
|
|
Travel Engine
|
Model
|
GX620-K1(HONDA) |
Type
|
Air Cooled 4Cycle 2Cylinder
|
|
Output(Ps/rpm)
|
Max. 16/3,300
|
|
Working Engine
|
Model
|
G4DJ-F
|
Type
|
Water Cooled 4Cylinder
|
|
Output(Ps/rpm)
|
Max. 86/5,000
|
|
Travel System
|
Wheel Driving System
|
4Wheel Drive
|
Transmission
|
Forward:6 , Reverse:2
|
|
Main Clutch
|
Dry single-Plate Type
|
|
Blower Clutch
|
Electronic Clutch
|
|
Sprayer Clutch
|
Electronic Clutch
|
|
Steering
|
Handle Type(Power Steering)
|
|
Wheel
|
Front
|
23x10.00-12-6PR
|
Rear
|
23x10.00-12-6PR
|
|
Sprayer
|
Model.Revolution(rpm)
|
HS90A.750~850
|
Pressure(kgf/cm2)
|
15~20
|
|
Discharge(L/min)
|
84
|
|
Water Pump
|
Type
|
Jet Pump
|
Discharge(L/min)
|
150
|
|
Chemical Tank & Capacity
|
Material.Capacity(L)
|
FRP.500
|
Agitating Method
|
Mechanical Propeller Type
|
|
Nozzle Type
|
Ceramic Disk Nozzle
|
|
Nozzle Hole DIA (mm) x Nomber
|
1.5Φx25EA
|
|
Spraying Volume (L/min)
|
50~57
|
|
Spraying Angle
|
210 °
|
|
Coverage(VOLxHm)
|
12x10
|
|
Loading case
|
Max loading weight(kg)
|
600
|
Size(L x W x H)
|
1578x1,106x250
|
|
Max lifting height(mm)
|
837
|
|
Max dump slope angle
|
45
|
|
Oil Pressure Lift
|
Model
|
PPL5AC2L-M
|
Capacity(cm2/rev)
|
5
|
|
Using Pressure(kgf/cm2)
|
120
|
|
Cylinder Diameter x Stroke(mm)
|
80x290
|
|
MIN Turning Radius (m)
|
2.1
|
|
Climbing Angel
|
30 °
|