PHOTO RESIST SDP-2150S PUMP
It’s Stepping Motor Pump which is suitable for a constant delivery pump.
Driving Method
Inner Type Bellows, No ripple & No shaking
Discharge & Control Method
- 5 phase step motor controls with stable
- Built in Motor Driver and CPU Board
- Pump status LED (Dispense, Pump, Home and Alarm)
- Compatible Pump Signal with Machine
- Auto dummy mode for Purge (Max, 999 times)
- DI/O Status Display
- Pump History recording
- Adjust the Dispense Delay Time
Optional
- Easy Software update to User request
- LAN Port for Pump maintenance by Laptop
- External Teaching Panel
Pump Specification
|
ITEM |
DESCRIPTION |
|
|
PROCESS |
||
|
Maximum Dispense Volume |
8.0cc |
|
|
Dispense / Reload Rate |
0.1cc/sec ~ 4.0cc/sec |
|
|
Dispense Volume Resolution |
0.1cc |
|
|
Dispense Repeatability |
±0.1 (0.8cp, 23°C) |
|
|
Viscosity |
Max : 150cp |
|
|
Electrical Specification |
||
|
Drive System |
Built in Motor Driver and Controller |
|
|
Control System |
Micom controller and Optional External Teaching Panel |
|
|
Main Power |
AC100~200V Free Voltage or DC 24V |
|
|
Output Port |
RS-232C Port or USB or RJ-45 LAN for Laptop External TP Panel Port (Serial 9P) DI/O Port (Serial 9P) Main AC Power or DC Power Cable (Select) |
|
|
Hardware |
||
|
Input Pulse / Dispense Volume |
812 pulse (full step) / 1cc |
|
|
Input Signal |
Pump Ready, Dispense and Spare |
|
|
Output Signal |
Alarm and Spare |
|
|
Resist In/Out |
1/4 inch Teflon |
|
|
Input Pulse / Encoder Output Pulse |
Full step – 1:1 Half step – 2:1 |
|
|
Weight |
3.2kg |
|
|
Dimension |
56(W) x 250 (L) x 200 (H) mm |
|
PHOTO RESIST SDP-2150 PUMP
It’s Stepping Motor Pump which is suitable for a constant delivery pump.
Driving Method
- Inner Type Bellows, No ripple & No shaking
Discharge & Control Method
- 5 phase step motor controls with stable
- Optional External Mono LCD Key Pad
- Pump status LED (Pump Run, Ready, Home and Alarm)
Signal is same as RRC Pump (ACT/MARK)
Pump Specification
|
ITEM |
DESCRIPTION |
|
|
PROCESS |
||
|
Maximum Dispense Volume |
8.0cc |
|
|
Dispense / Reload Rate |
0.1cc/sec ~ 4.0cc/sec |
|
|
Dispense Volume Resolution |
0.1cc |
|
|
Dispense Repeatability |
±0.1 (0.8cp, 23°C) |
|
|
Viscosity |
Max : 150cp |
|
|
Electrical Specification |
||
|
Drive System |
Phase Stepping Motor, Driver Current : 300~500mA/cycle |
|
|
Control System |
Power 5V |
|
|
Main Power |
N/A |
|
|
Input Port |
Encoder and 5-Phase Port (same with RRC) |
|
|
Hardware |
||
|
Input Pulse / Dispense Volume |
812 pulse (full step) / 1cc |
|
|
Resist In/Out |
1/4 inch Teflon |
|
|
Input Pulse / Encoder Output Pulse |
Full step – 1:1 Half step – 2:1 |
|
|
Weight |
2.3kg |
|
|
Dimension |
56(W) x 250 (L) x 153.5 (H) mm |
|
