Features:

Focusing on the research and development of tufting machine for 30 year, self-developed control system, easy operation, automatic discharge hole, automatic detection of mechanical failure, mechanically stable, easy to replace the fixture, do product diversification, and can be customized according to customer demand for products machinery.

I. The three major actuation of the tufting machine: round-trip duel-cam unspaced transmission is adopted for bristle mouth, wire feeding and wire cutting. The transmission is very easy and smooth. Technical performance is highly required, and such tufting machine is unique.

II. Material of Main Parts and HRC Hardness

1.The material of the 3 sets (6) of cams for the round trip of wire feeding and cutting by bristle mouth is 0.20mm thick bearing steel (G Cr15). The HRC hardness of the part from the surface inward 0.20mm is 60-62 degrees, and the internal HRC hardness is 45-50 degrees.

2.The material of fixed and movable bristle-feeding knives is imported DC53. Its overall HRC hardness is 60±1 degrees, and the arc runout tolerance of the movable knife is ±0.01mm.

3.The material of piston rod of bristle mouthbase and wire-cutting piston rod isbearing steel (G Cr15). Its overall hardness is 60±1 degrees.

4. The material of small shafts at special part is W18 Cr4 V2. The HRC hardness of the part from the surface inward 0.20mm is 61-63 degrees, and the internal HRC hardness is 50-55 degrees. Such material is wear-resistant and not easy broken.

Technical Parameters:

1. Gross box: double color

2. tufting speed: 700-800 hole / minute

3. tufting aperture: Ф = 1.6-3mm

4. tufting length: 10 - 15mm

5. Patented Products:Parcel Hair,The Long Hair Parcel in The Middle