Product Details
Features
Parameters
Configurations
Information
3-Layer Corrugated Paperboard Production Line
Introduction:
ROYAL PACKING is professional producer for Corrugated cardboard production line in China. We can produce the 3 ply, 5 ply and 7 ply corrugated cardboard production line, Widths from 1000 to 2500mm, production speeds from 60 to 250 meters/min. We can offer reasonable project to meet customers’ requirements.
More Details:
Main Equipment List
Equipments Name | MJT-80-1800 Economical | MJT-120-1800 Standard | MJT-150-1800 High-speed |
Mechanical Roll Stand (include the paper roll rail.) | 3 | ||
Hydraulic Roll Stand (include the paper roll rail.) | 3 | 3 | |
Pre-heater Ф600mm | 1 | ||
Pre-heater Ф800mm (Ground) | 2 | 2 | |
Vacuum Single Facer (RollФ280), gimbal drive | 1 | ||
Vacuum Single Facer (RollФ320), gimbal drive | 1 | 1 | |
Transport Bridge (Electrical adjust the precision, vacuum tighten and loosen.) | 1 | ||
Heavy model transport bridge (Electrical adjust the precision, vacuum tighten and loosen.) | 1 | 1 | |
Double preheater Ф600mm | 1 | ||
Double preheater Ф800mm | 1 | 1 | |
Double Gluer - A | 1 | ||
Double Gluer - B | 1 | 1 | |
Double baker (600mm X12heat plates, 4.5meter cooling part.) | 1 | ||
Double baker (600mm X14heat plates, 5meter cooling part.) | 1 | ||
Double baker (600mm X16heat plates, 6meter cooling part.) | 1 | ||
Thin Blade (Simple electrical adjust.) | 1 | ||
NC Thin Blade | 1 | 1 | |
NC Cutter | 1 | 1 | 1 |
Conveyor and Stacker | 1 | 1 | 1 |
Glue system | 1 | 1 | 1 |
Steam system | 1 | 1 | 1 |
Main Technical Parameters
Technological Parameters | MJT-80-1800 Economical model | MJT-120-1800 Standard model | MJT-150-1800 High-Speed |
Steam cost | 0.8~1.2Mpa About 2T/h | 0.8~1.2Mpa About 2T/h | 0.8~1.2Mpa About 2T/h |
Starch Cost (g/m2) | 11-13 | 11-13 | 11-13 |
Raw paper width (mm) | 1800 | 1800 | 1800 |
Mechanical Speed | 100m/min | 150m/min | 180m/min |
Economical speed | 80m/min | 120m/min | 150m/min |
Workers | 6-9 | 6-9 | 6-9 |
Note: Above parameters are for your reference. It depends on the different machines you choose.
※ Hydraulic shaftless mill roll stand
※Structural feature:
★adopt hydraulic drive to complete the paper clamping, loosen, remove for the medium, translation left and right and others，the lifting of the paper adopts hydraulic drive.
★brake adjustable adopts multipoint braking system.
★every stand matched two sets paper car , and they can paper on the both sides at the same time.
※Technical parameters:
1. The range of clamping paper: MAX1600mm MIN800mm
2. Clamping diameters: MAX￠1500mm MIN￠350mm
3. Main shaft diameter of paper holder: ￠242mm
4. Gas source work pressure(Mpa): 0.4---0.8Mpa
※Hydraulic system parameters:
1.Work pressure (Mpa):16---18Mpa
2.Lifting hydraulic cylinder: ￠100×440mm
3.Clamping hydraulic cylinder: ￠63×1300m
4.Hydraulic station motor power: 3KW --380V -- 50Hz
5.Solenoid valve voltage: 220V 50 Hz
※Mainly purchased parts, raw materials and origin:
|
Name of main parts |
Brands or place of origin |
Material |
|
Main shaft |
Day steel production |
Diameter 242mm |
|
Swing arm |
Production by own |
Resin sand gray ironHT200 |
|
wallboard |
Jigang prduction |
Q235AWelding parts |
|
bearing |
HRB,ZWZ,LYC | |
|
expand chuck |
Zhejiang xusheng |
3, 4inch shared |
